3/8" M x 3/8" M BSP Fitting
Stainless steel 3/8" M x 3/8" M BSP Fitting Cross-references: Part number Manufacturer C..105 Ascaso MZ.369 Ascaso V..310 Ascaso 25687...
View full detailsStainless steel 3/8" M x 3/8" M BSP Fitting Cross-references: Part number Manufacturer C..105 Ascaso MZ.369 Ascaso V..310 Ascaso 25687...
View full details3/8" M x 3/8" M BSP Pump Fitting with recess for filter
Generic 3/8" M x 3/8" F BSP Elbow Fitting. Cross-references: Part number Manufacturer SP.282 Ascaso V.1871 Ascaso 1230200016 Grimac ...
View full detailsGeneric 3/8" M x 3/8" M BSP Elbow Fitting. Sometimes brass and sometimes nickel plated. Cross-references: Part number Manufacturer V..906 ...
View full details3/8" British Standard Pipe x 5 mm, uses a 19 mm wrench. Cross-references: Part number Manufacturer 4038136012 Faema L183/1 La Marzocco ...
View full details3/8" British Standard Pipe x 4 mm, uses a 20 mm wrench. Cross-references: Part number Manufacturer S..429 Ascaso 5082588 LF 00300013 Nuo...
View full detailsPerfect for pulling shots and measure small amounts of liquid. Graduated marks read in ounces and milliliters for all your measuring needs. Feature...
View full detailsBlank, blind portafilter for back flushing group heads. This is for machines using 53mm baskets such as Spaziale, Astoria CMA and Wega. Make sure...
View full details6.5 mm hole for screw. Fits La Marzocco, Slayer, Synesso and (old) Carimali. Cross-references: Part number Manufacturer MZ.275 Ascaso 8MZ...
View full details6-Pin green wire loom plug that connects to the Gicar auto-fill circuit. Cross-Reference: Part number Manufacturer 7631516 Bezzera 8.6.17....
View full detailsSantoprene rubber, internal pump connection ø 6 mm, hose-end fitting ø 7.5 mm. Cross-Reference: Part number Manufacturer 7303001 Bezze...
View full details70 x 57 x 0.8 mm. This paper shim is used to increase the profile height of a group gasket in cases where portafilter wear causes the portafilter t...
View full details70 x 57 x 1 mm. This EPDM shim is used to increase the profile height of a group gasket in cases where portafilter wear causes the portafilter to e...
View full details73 x 59 x 0.8mm. Paper shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in...
View full details73.5 x 59 x 1mm. EPDM shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in ...
View full detailsUse this fitting to install a 1/8" M BSP (male British Standard Pipe) fitting, doing away with the plastic barbed fittings used on vibratory pumps....
View full detailsUsed primarily to filter solenoid valves. Cross-references: Part number Manufacturer S..130 Ascaso 10251001 Astoria CMA 18-292 Atel 10066...
View full detailsYou just bought a new plumbed in espresso machine and are reading the installation instructions. You notice that the installation instructions say...
View full detailsThis gasket measures 73.5 x 54 x 8.5mm with 3 internal cuts. For the older versions of the Arc, Basic, Dream and Steel (2012-2017). Cross-refe...
View full detailsAscaso steam wand tip with 1 hole of 1.5mm diameter. Fits 10mm O.D. female threaded wands. Cross-references: Part number Manufacturer ...
View full details6mm barbed T hose fitting Cross-references: Part number Manufacturer 1315023 LF F05000012 Nuova Ricambi 05000012 Nuova Simonelli ...
View full details